- nanotron MN03SWBLE, swarm bee LE v3 module

nanotron MN03SWBLE, swarm bee LE v3 module 
SKU: 18047
Stock: 40
Delivery Time: If not in stock, 3-4 weeks
Part Number: MN03SWBLE
Manufacturer/Supplier: Nanotron
Specification 1: Frequency range: 2.4GHz ISM-band (2.400-2.4835 GHz)
Specification 2: Modulation: Chirp Spread Spectrum (CSS)
Supply Voltage: 3.3 V to 5.5 V
Datasheet: https://nanotron.com/EN/wp-content/uploads/2020/08/Inpixon_PB_swarm_bee_LE_V3_1.94.pdf

$ 95.00

Quantity 5-49 50-99 100+
Unit price$ 95.00 $ 79.50 $ 65.20
Quantity (at least 5)

    Add to wish list

nanotron MN03SWBLE, swarm bee LE v3 module

Embedded 2.4 GHz Chirp Radio Location Awareness and Concurrent Wireless Communication


swarm bee LE V3 integrates nanotron’s location RF-Chip, nanoLOC, and is complemented with embedded accelerometer and temperature sensors. With low external component requirements, the swarm bee LE V3 is an ideal choice for personnel, equipment and asset tracking products, where in- and outdoor location sensing is critical.

swarm bee LE V3 based tags, when deployed with nanoANQ anchors and our IoT Platform, provide the most comprehensive real-time location system (RTLS) on the market today.

 

  • Engage markets with a small footprint module – suiting wearables, asset tags or cap lamps.
  • Deliver higher performance applications by extending the range (+4dB RF Pout).
  • Cut integration time with the tag-ready swarm bee design.


The swarm bee LE V3 is based upon the nanoLOC transceiver chipset. With configurable transmission power output, the module is capable of radio range up to 1,000 m with typical applications from 300m to 500 m. The increased output power further stabilizes the communication reliability and connection robustness.

Features

 

RF standard:  Chirp, 2.4 GHz, ISM band
RF frequency range:   2.4 to 2.4835 GHz, (80 MHz BW)
RF transfer rates:   1 Mbps 80/1, 250 Kbps 80/4
RF output power:   Configurable, -12 to +20 dBm
RF sensitivity:   80/1 mode: -89 dBm typ.,
                         80/4 mode: -95 dBm typ.
MCU type:   ARM Cortex M4


Software
 

Firmware update:   FOTA, over UART


Ranging and positioning
 

Typ. airtime per ranging cycle:  1.8 ms
Ranging accuracy:  ~1 m
Range - TApp2.: 300-500 m, Cap3.: 1,000 m


Interfaces
 

Host interface:  UART (115 kbps to 1 Mbps)
RF interface:  50 Ohm RF Port
Other:  4x GPIOs, 1x ADC
 

Electrical data
 

Supply voltage:  3.3 V to 5.5 V
Current consumption

TX mode, active (+20 dBm):  max. 230 mA
RX mode, active:   max. 55 mA
Standby mode: 6.5 mA
Nap mode max.: 20 µA
Snooze mode max.: 3 µA
Deep sleep max.: 3 µA


Package and dimensions
 

Dimensions:   22 mm x 23 mm x 4.4 mm
Weight:  4 grams

 

Environmental and quality
 
Operating temperature:  -30°C to +85°C